Vol. 3 No. 1 (2026): Philosophy & Reason Volume III
Articles

From Moisture Transport to Mold Control: Evaluating SCHN 135 Hydrophobic Coatings on HVAC Filters

Behice Yagmur
Bio
Angela Lostaunau
Bio
Brandon Varon
Bio
Devin Mayahi
Bio
Alex Taylor
Bio
Seamus Curran
Bio
Categories

Published 2026-11-19

How to Cite

Yagmur, B., Lostaunau, A., Varon, B., Mayahi, D., Taylor, A., & Curran, S. (2026). From Moisture Transport to Mold Control: Evaluating SCHN 135 Hydrophobic Coatings on HVAC Filters. Philosophy and Reason, 3(1). https://doi.org/10.67644/pandr.v3i1.2330

Abstract

Moisture retained within heating, ventilation, and air conditioning (HVAC) filtration media can create conditions favorable to fungal colonization and growth, making control of liquid transport an important factor for indoor environmental management. This study evaluates whether SCHN 135 (Integricote™), a hydrophobic organosilane sol-gel coating, reduces the passage of water-based aerosol particles across HVAC filters. Untreated and treated 1-inch Minimum Efficiency Reporting Value (MERV) 8, 5-inch MERV 8, and 5-inch MERV 13 filters were challenged with red dye particles using a K12 Nanofogger under controlled conditions. A downstream collector filter captured particles passing through the test filters, which were subsequently evaluated. Relative to untreated samples, SCHN 135 coating reduced downstream microscopic deposition by 77.1% for 1-inch MERV 8, 63.2% for 5-inch MERV 8, and 55.0% for 5-inch MERV 13 filters. These findings indicate that SCHN 135 treatment can reduce aqueous aerosol transport. Since this study evaluated liquid deposition rather than standardized filtration efficiency or fungal growth, the results do not demonstrate enhanced MERV performance or antifungal activity. Instead, they support a potential mechanism to control moisture that may indirectly reduce conditions favorable to fungal growth, warranting further microbiological testing.